TEXMAC Hoopmaster Hooping System

Click here to go back to the Accessories page

Click on a link below if you need to jump to a particular section on this page:

Embroiderer’s Buddy Hoopmaster Hooping Systems

Specialty Application Frames (new from Happy - PR-600 Frame Adapter)

The Embroiderer's Buddy Alignment Guide

Use the Embroiderer’s Buddy and Embroiderer’s Little Buddy to achieve perfect & consistent embroidery centering every time. Easy placement on all types of garments, towels, table cloths, and much more. Exact embroidery center marking takes only seconds. Pre-marked industry standard embroidery placement markings give you instant positioning for most people. Choose your own custom markings and get perfect positioning that's right for you.
	The Embroiderer's Buddy - Adult Embroidery Buddy Placement Tool - For Adult Shirts Size Small - 4XL. Precisely position designs on the chest of a shirt. Find the center placement mark for your design, using industry standards instead of guesswork. This 7" x 9" L-shaped device is printed on the bottom and right side with shirt sizes for placement.	Retail Price $21.95
	The Embroiderer's Little Buddy - Child Embroidery Buddy Placement Tool - For Children's Shirts Sizes 2-7 & Youth Shirts Sizes 8-22 This 7" x 9" L-shaped device is printed on the bottom and right side with shirt sizes for placement.	Retail Price $21.95
Not sure where to place embroidery designs on shirt fronts? You don't want the design too high or too low. You want it to look professional. These handy tools help place designs on shirt's center, right, or left front. Place the horizontal arm of the Buddy on the garment center line with the mark that corresponds to the size you have chosen. Place the vertical arm of the tool on the edge of the folded shoulder with the mark that again corresponds to the size you have chosen. Mark the embroidery center at the notched corner of the tool. Garment is now ready to be hooped and embroidered. To download the Embroidery Buddy instructions click HERE.

To download our Embroidery Placement Guide click HERE.

Hoopmaster Hooping Aids

The Hoop Master's many features make hooping easy, faster, and more consistent. You can document logo placement for quick setups and more consistent placement. The Hoopmaster is custom made for your hoops, so there is no hardware to adjust. With the Hoopmaster, new employees will be hooping in no time at all.

Complete Hoopmaster Station Kits
Hoopmaster Kit with a Single Hoop Fixture	Retail Price Only $ 545.00
Hoopmaster station Freestyle Arm Freestyle Arm mounting base Pocket Alignment Guide & T-Square Single Hoop Fixture for the Hoop of Your Choice
examples:
HP Kit #1 Hoopmaster Kit for the 15cm Round Hoop	Retail Price Only $ 545.00
Hoopmaster station 15cm. Round Fixture for OEM Happy & Durkee Hoop Freestyle Arm Freestyle Arm mounting base Pocket Alignment Guide & T-Square
DK 6X6 KIT Hoopmaster Kit for the Durkee 15cm Square Hoop	Retail Price Only $ 545.00
Hoopmaster station 15cm. Square (6" x 6") Fixture for Durkee Hoop Freestyle Arm Freestyle Arm mounting base Pocket Alignment Guide & T-Square

Hoopmaster Kit with 2 Hoop Fixtures	Retail Price Only $ 840.00
Hoopmaster station Freestyle Arm Freestyle Arm mounting base Pocket Alignment Guide & T-Square 2 Hoop Fixtures for the Hoops of Your Choice
examples
HP Kit #2 Hoopmaster Kit with 12cm & 15cm Round Hoop Fixtures	Retail Price Only $ 840.00
Hoopmaster Station 12cm. Round Fixture for OEM Happy & Durkee Hoop 15cm. Round Fixture for OEM Happy & Durkee Hoop Freestyle Arm Freestyle Arm mounting base Pocket Alignment Guide & T-Square

Individual Prices
The Main Station can be purchased separately without additional items	Retail Price Only $ 250.00
The Fixture w/Freestyle Arm (for all Happy and aftermarket hoops) was designed to help you hoop small garments. This provides you with the most accurate and smallest hooping surface possible, making hooping in tight spots a breeze. The Freestyle Arm is perfect for hooping many items like: Sleeves, Cuffs, Collars, Jackets, Cap Backs, Pant Legs, Aprons, Towels, Bags, Ties, Youth Garments, Etc. examples of Fixture and Freestyle Arm for: 9cm Durkee Round Hoop (pn: HP-9CM) 12cm Happy or Durkee Round Hoop (pn: HP-12CM) 15cm Happy or Durkee Round Hoop (pn: HP-15CM) 18cm Happy or Durkee Round Hoop (pn: HP-18CM) 21cm Happy or Durkee Round Hoop (pn: HP-21CM) 15cm Durkee Square Hoop (pn: DK- 6X6) 24cm Durkee Square Hoop (pn: DK-15x15)	Retail Price Only $ 295.00
The Cap Back Fixture with Freestyle Arm is a special fixture that was designed for customers that embroider a lot of cap backs. It features rounded edges to better fit round back of caps. examples of Cap Back Fixture for: 12cm Cap Back Fixture (pn: HPCP-12CM) 15cm Cap Back Fixture (pn: HP-CP-15CM)	Retail Price Only $ 250.00
The Free Style Arm Mounting Base is a portable base that is designed to hold the various size Freestyle Arms that does not need to be mounted to to any surface. (pn: PMNT-MNT)	Retail Price Only $ 60.00
The Jacket Back Fixture is designed to fit on your existing station and hold your hoop and backing material while hooping. (depending on size $200.00 - $225.00) examples of Fixture for Jacket Back Frame for: 30cm x 15cm Durkee Jacket Back Hoop (pn: DK- 30X15) 30cm Durkee Square Jacket Back Hoop (pn: DK-335X329) 30cm x 41cm Durkee Jacket Back (pn: DK 300X410) 32cm Happy Square Hoop (pn: HP-320X320)	Retail Price Only $ 200.00 - $225.00 $ 225.00 $ 200.00 $ 225.00 $ 200.00
The Pocket Alignment Guide is designed to provide a precise alignment grid for pockets and shirts. examples of Pocket Alignment Guide for: 12cm Pocket Guide for Round Hoop (pn: HP-12-PAG) 15cm Pocket Guide for Round Hoop (pn: HP-15-PAG) 18cm Pocket Guide for Round Hoop (pn: HP-18-PAG) 21cm Pocket Guide for Round Hoop (pn: HP-21-PAG) (guide on 21cm hoop) 15cm Pocket Guide for Durkee Square Hoop (pn:DK-6X6-PAG)	Retail Price Only $ 50.00
The T-Square Alignment Guide eliminates the need to pre-measure and mark garments. This makes logo placement on jackets and other garments easy and accurate. With the T-Square and Freestyle arm you can hoop jackets sideways like the one shown in the picture. (pn: T-SQUARE)	Retail Price Only $ 25.00
The Station Extender is used to make hooping larger garments easy. It attaches to the pins on your existing station top and increases the width of the station for larger garments. It adds 6 inches to the width of the station to help stretch out larger garments for easy hooping. (pn: EXTENDER)	Retail Price Only $ 49.95
The Fold & Bag is a portable and adjustable shirt folding device. It can be adjusted for fold widths between 9 and 12 inches. You can also bag the garment before removing it from the board. It makes folding garments faster, and gives your products a more consistent look. (pn: FOLD-BAG) <-- click to see an animation.	Retail Price Only $ 74.95
The Complete Infant Station is about 8.5 inches wide. It can be used with fixtures from 9cm to 21cm and comes with the legs. It works great for garments under size 4T. (pn: I STATION COMPLETE)	Retail Price Only $ 94.95
The Complete Medium Station is about 12.8 inches wide for youth or small adult garments. It can be used with fixtures from 9cm to 21cm, some of the smaller jacket back sizes and comes with the legs.. It is 3 inches narrower than the normal station, so it works great for children's garments down to about 4T. (pn: M STATION COMPLETE)	Retail Price Only $ 125.00
Youth or Small Adult 12.8" Wide Board Only (pn: M STATION)	Retail Price Only $ 94.95

To download the Hoopmaster Placement Guide click HERE.

NOT ALL ITEMS ARE CARRIED IN STOCK
Items not is stock will be shipped directly from the manufacturer to your location. Additional shipping charges may apply.

Specialty Application Frames


Dog Collar / Karate Belt Hoop This hoop will let you embroider directly on a dog collar, karate belt or horse halter. It works on any Happy machine with a 360mm, (14 inch ) needle distance. Retail Price Only $280.00 each (Part Number: HAP-14-DOG)	Military Name Tape Hoop This hoop will allow for easy sewing on name tapes, particularly the continuous rolls. It works with any Happy machine with a 360mm, (14 inch) needle distance Retail Price Only $298.00 each (Part Number: HAP-14-NAME TAPE)

Adapter Bracket for using Brother PR600 Hoops On your Happy Voyager !

With this bracket you can use the frames from the Brother PR-600 on your Happy HCS Voyager.
It mounts directly to the pantograph in place of the tubular sash. It allows you to use the adapter from Brother to make use of the PR-600 hoops on your HCS Voyager. If you own a PR-600 and want the versatility of being able to use to use your Brother hoops on your Happy, this is a must have item.

Bracket for Brother PR-600 Frames - Retail Price Only $201.75 each
(Part Number: HCB40162)
To download additional information click HERE

NOT ALL ITEMS ARE CARRIED IN STOCK
Items not is stock will be shipped directly from the manufacturer to your location. Additional shipping charges may apply.

Click here to go back to the Accessories page

Items and Pricing are subject to change without prior notice