Click here to go back to the Accessories page
Click on a link below if you need to jump to a particular section on this page:

Happy Hoops          Durkee Hoops        Allied Hoops          Hooptech Hoops          PR-600 Frame Bracket

Happy Starter Hoop Kits           Hoop Rings & Adjusting Screws          Starter Hoop Kits         Specialty Application Frames

Embroidery Machine Hoops
 
Popular Hoops - Listed below are all the most popular hoop sizes and styles for HAPPY machines using the 360mm needle distance 
(fits most HAPPY machines).  All hoops are double height except for PTA-32320 and the wooden hoops, these are single height hoops.

For information on Double vs. Single Height hoops and Round vs. Square Hoops, click here.

HELPFUL HINT - Always remove any hoops or clamping systems before turning on the machine to prevent damage
to the presser foot and thread holder assembly.!!

Every hoop for your Happy Embroidery machine has a 3 digit numerical suffix which indicates the TOTAL WIDTH (NEEDLE DISTANCE) of the hoop, including the metal arm brackets. When ordering you should know the width your existing hoop.
The picture below is how you should measure your hoop. This is how we determine which hoops will fit your machine.

Hoop Width

For example, the  PTA-15-360 is the 15cm (5.75 inch round) hoop which has a total width of 360mm (14 inch).  
A PTA-15-520 is the 15cm (5.75 inch round) hoop which has a total width of 520mm (20-1/4 inch) which fits all HCD & HCA machines ONLY.
Always specify when ordering hoops, both the desired hoop size and the total hoop width (Needle Distance).
If you are unsure, please ask a Texmac Parts Associate to assist you in determining the correct hoop size for your machine.

For additional information on hoop sizing, hoop width (needle distance), comparison of round and square hoops,
and suggestions on what hoops to use and when.
Click here to go to the Hoops Information page.

Part Number Popular Hoop Sizes and Descriptions Retail Price Only
HAPPY HOOPS          Original Equipment Manufacture - Made in Japan

PTA-12-360-HAPPY

 12cm (4.75") round tubular hoop (Happy OEM) $ 39.00 ea.
PTA-15-360-HAPPY  15cm (6.0") round tubular hoop (Happy OEM) $ 42.00 ea.
PTA-18-360-HAPPY  18cm (7.0") round tubular hoop (Happy OEM) $ 49.95 ea.
PTA-21 w/xtra ring  21cm (8.0") round tubular 360mm hoop (Happy OEM) -  Special->
 with an additional outer ring with screw included for FREE
$ 39.95 ea

PTA-32320-360

 32cm (12.5"") square tubular hoop (Happy OEM) This is a single height hoop. 
Good for T-shirts and lighter fabric application.    
$ 87.50 ea.
WS-42440-520  420mm x 440mm (18.5" x 17.75") wooden tubular hoop (Happy OEM) 520mm needle distance.
This hoop will not fit on the HCS
. Fits HCD & HCA models Only
$ 185.55 ea.
DURKEE HOOPS          Made in the USA  (Lifetime Guarantee on Plastic Components)

Texmac can provide Durkee hoops for most embroidery machines in addition to the Happy embroidery machine.
Barudan, Brother, Inbro, Melco, Renaissance, SWF, Tajima, Toyota, ZSK,
Now Available for the Babylock EMP6 / PR-600 & Janome MB-4

To see additional machines and sizes that are available please click HERE.

Part #

Retail Price Only

PTA-9-360

  9cm  (3.5") round tubular 360mm hoop (Durkee)  $ 31.95 ea
PTA-12-360  12cm (4.75") round tubular 360mm hoop (Durkee) $ 31.95 ea
PTA-15-360  15cm (6.0") round tubular 360mm hoop (Durkee)  $ 31.95 ea
PTA-18-360  18cm (7.0") round tubular 360mm hoop (Durkee)  $ 34.95 ea
H-15x15-360  15cm (6.0") square tubular 360mm hoop (Durkee)                                                      Sale Price--> $ 34.15 ea

H-12.5x24-360

12.5cm x 24cm (5" x 9.5") rectangular tubular 360mm hoop (Durkee)  $ 49.95 ea

H-24x24-360

 24cm (9.5") square tubular 360mm hoop (Durkee)                                                      Sale Price--> $ 34.15 ea

H-30x10-360

30cm x 10cm  (12" x 4") rectangular tubular hoop (Durkee) $ 67.95 ea
This hoop works both long ways (front to back; good for sleeves and pant legs on straight leg and youth sizes), click HERE for pic
and long ways (side to side; for the long pocket on a hoodie)!   This hoop is considered a two-in-one hoop.
To see a comparison of the 30x10 and the 30x15 hoops stacked together, Click HERE

H-30x15-360

30cm x 15cm  (12" x 6") rectangular tubular 360mm hoop (Durkee) $ 67.95 ea
This hoop works both long ways (front to back; good for pant legs click HERE for pic) and long ways (side to side; for jacket back script). 
This hoop is considered a two-in-one hoop.

PTA-30300-360

30cm (12") square tubular double height jacket back 360mm hoop (Durkee)                   Sale Price--> $ 56.00 ea
The 30cm (12")  hoop because of its greater height, allows for hooping of heavier, thicker jackets than the PTA-32320
 

H-30x41-360

30cm x 41cm (12 x 16") rectangular tubular jacket back hoop which allows a standard 360mm field Happy to do "Stretch" designs. This hoop will not fit on the HCS.
Will fit HCA, HCD, HCG, HCM and HCR models with 360mm N.D. and at least 40cm Y axis sewing field
$ 77.95 ea
 On an HCA or an HCD machine the H-30x41-360 hoop can also be turned 90 degrees and be used with long side in the X axis
just like the large 520mm wooden hoop. All it requires are the following set of brackets (BELOW)

 

HLH18360 - Left hand side bracket for H-30x41-360 to fit long ways in the 520mm needle distance
HRH18360 - Right hand side bracket for H-30x41-360 to fit long ways in the 520mm needle distance
A left and right side bracket must be ordered to make this hoop work in the 520mm hoop width
$ 6.00 ea
$ 6.00 ea

Click HERE for a picture of this hoop with the additional brackets installed
     
ALLIED GRID-LOCK HOOPS  Have a 1cm grid embossed on the face of the hoop to help align your projects - Made in India
Click here to see a picture
Part #

Overstock Clearance Special - limited to in-stock quantity only

Retail Price Only

PTA-7-360   7cm  (2.36") round tubular hoop (Allied) grid lock design $ 39.75 ea
AGL-HPY-09-360   9cm  (3.15") round tubular hoop (Allied) grid lock design $ 45.00 ea
AGL-HPY-12-360  12cm (4.33") round tubular hoop (Allied) grid lock design $ 45.00 ea
AGL-HPY-15-360  15cm (5.51") round tubular hoop (Allied) grid lock design $ 45.00 ea
AGL-HPY-18-360  18cm (6.69") round tubular hoop (Allied) grid lock design $ 45.00 ea
AGL-HPY-21-360  21cm (7.87") round tubular hoop (Allied) grid lock design $ 45.00 ea
AGL-HPY-24X30-360  30cm x 24cm  (12" x 9") rectangular tubular hoop (Allied) grid lock design  - Clearance Special-> $ 64.00 ea
HOOPTECH HOOPS   Have an External Screw Assembly - Made in the USA - click here to see a picture

These hoops make it much easier to adjust outer ring for carpal tunnel syndrome or arthritis sufferers!! 

Part #

Overstock Clearance Special - limited to in-stock quantity only

Retail Price Only

5.5R HAPPY 360  14cm (5.5") round tubular hoop for Happy with 360mm N.D. (Hooptech)  - Clearance Special-> $ 28.50 ea
3.5SQ HAPPY 360  8.9cm (3.5") square tubular hoop for Happy with 360mm N.D. (Hooptech) $ 39.95 ea
4.5SQ HAPPY 360  11.5cm (4.5") square tubular hoop for Happy with 360mm N.D. (Hooptech) $ 39.95 ea
5.5SQ HAPPY 360  13.9cm (5.5") square tubular hoop for Happy with 360mm N.D. (Hooptech) $ 39.95 ea
6.5SQ HAPPY 360  16.5cm (6.5") square tubular hoop for Happy with 360mm N.D. (Hooptech) $ 39.95 ea
7.5SQ HAPPY 360  19cm (7.5") square tubular hoop for Happy with 360mm N.D. (Hooptech) $ 39.95 ea
6x11.5  HAPPY 360  15cm x 30cm (6" x 11.5") rectangular tubular hoop for Happy with 360mm N.D. (Hooptech) 
This hoop mounts in 1 direction only.
$ 68.95 ea
11.5SQ HAPPY 360  30cm (11.5") square tubular hoop for Happy with 360mm N.D. (Hooptech)   $ 48.95 ea
 
Popular Hoops - Listed below are all the most popular hoop sizes and styles for HAPPY machines using the 360mm needle distance 
(fits most HAPPY machines).  All hoops are double height except for PTA-32320 and the wooden hoops, these are single height hoops.

For information on double VS single height hoops click here.

HELPFUL HINT - Always remove any hoops or clamping systems before turning on the machine to prevent damage
to the presser foot and thread holder assembly.!!

 
Starter Hoop Kits

We also offer several Hoop Kits that will give your operation a variety of popular hoops at a better price than purchasing them separately.

Standard Hoop Kit

Includes 1 each of these hoops:

PTA-9-360     Durkee 9cm (3.5'') round tubular hoop
PTA-12-360
     Durkee 12cm (4.75'') round tubular hoop
PTA-18-360
     Durkee 18cm (7'') round tubular hoop

Retail Price Only $88.54
Price to buy these hoops separately - $98.85
part#: STANDARD HOOP KIT

Deluxe Hoop Kit

Includes each of these hoops:
2 of the PTA-12-360  Durkee 12cm (4.75'') round tubular hoops
1 of the PTA-15-360 Durkee 15cm (6'') round tubular hoop
2 of the PTA-18-360  Durkee 18cm (7'') round tubular hoops
1 of the PTA-32320-360 Happy OEM 32cm (12.5'') square tubular hoop

Retail Price Only $239.66

Price to buy these hoops separately - $253.25
part#: DELUXE HOOP KIT

Durkee Square Hoop Kit 

Includes 1 each of these hoops:
H-15X15-360 15cm (6") Square
H-24X24-360 24cm (9.5") Square
H-30X15-360 30cm x 15cm (12" X 6") 2 in 1
PTA-30300-360 30cm (12") Square

Retail Price Only $187.00
Price to buy these hoops separately - $198.87
part#: SQUARE HOOP KIT

 
Hoop Rings & Adjusting Screws

 

Part #

Retail Price Only

PS-9  

   9cm outer ring (Happy OEM Made In Japan)

 $ 6.75 ea.

PS-12

  12cm outer ring (Happy OEM Made In Japan)

 $ 12.40 ea.

PS-15

  15cm outer ring (Happy OEM Made In Japan)

 $ 14.08 ea.

PS-18

  18cm outer ring (Happy OEM Made In Japan)

 $ 15.47 ea.

PS-21

  21cm outer ring (Happy OEM Made In Japan)

 $ 7.95 ea.

 

Part #

Replacement Adjusting Screws for OEM Happy Hoops

Retail Price Only

MPZ02200 21mm OEM Brass Hoop Screw for 12, 15, 18 & 21cm Happy (OEM Japan) Round Hoops -> Sale Price $ 1.99 ea.
MPZ02200-L 23mm Long Brass Hoop Screw for 12, 15, 18 & 21cm Happy Round Hoops
               For use on bulkier projects   
$ 3.70 ea.
MPZ02200-XL 27mm Extra-long Brass Hoop Screw for  12, 15, 18 & 21cm Happy Round Hoops
               For use with thicker projects (not for use with thin items)   
$ 3.85 ea.
FRA40010 Silver Hoop Screw Assembly, with Barrel and E Clip for PTA-32320 (Happy OEM) 12.5" X 12.5" Hoop       $ 3.80 ea.
Hex Head Screw Assy  Brass Hoop Screw Assembly for ALL WOODEN HOOPS     NEW (Knurled) Construction
               This part has a 67mm screw length - for thin projects
$ 15.98 ea.
AGL-SPF-79
with spring
 
Brass Hoop Screw Assembly for ALL WOODEN HOOPS
       This part has a longer 79mm screw length - for bulkier projects (heavily constructed jacket backs)
$ 15.98 ea.
Part #

Replacement Adjusting Screws for Durkee Hoops

Retail Price Only
TH-S 27mm Brass Hoop Screw for Durkee 9, 12, 15, 18, and H-15 X 15 (6" Square) 
                (All Durkee Hoops have DE stamped on the outer ring)
$ 3.15 ea.
TH-EZ EZ Turn 27mm Brass Hoop Screw for Durkee 9, 12, 15, 18, and H-15 X 15 (6" Square)                NEW
            the EZ Turn thumbscrew is thicker and is knurled to make it EASIER to tighten!
$ 4.25 ea.
TH-S-LG 33mm Brass Hoop Screw for Durkee H-24 X 24, H-30 X 15, H-30 X 41, PTA-30300
                 (All Durkee Hoops have DE stamped on the Outer Ring)
$ 2.85 ea.
TH-EZ-LG EZ Turn 33mm Brass Hoop Screw for Durkee H-24 X 24, H-30 X 10, H-30 X 15, H-30 X 41,           NEW
        PTA-30300 - the EZ Turn thumbscrew is thicker and is knurled to make it EASIER to tighten!
$ 4.75 ea.
Part #

Replacement Adjusting Screws for Allied Hoops

Retail Price Only
MPZ02200 21mm Brass Hoop Screw for  7cm & 9cm Allied Round Hoops $ 3.70 ea.
MPZ02200-L 23mm Long Brass Hoop Screw for  12cm & 15cm Allied Round Hoops    $ 3.70 ea.
MPZ02200-XL 27mm Extra-long Brass Hoop Screw for 18cm & 21cm Allied Round Hoops and 24cm Allied Square $ 3.85 ea.
AGL-SPF-79
with spring
 
Brass Hoop Screw Assembly for 30cm x 24cm Allied Hoops and ALL WOODEN HOOPS $ 15.98 ea.
     

Part #

Hooptech Replacement Hoop Parts

Retail Price Only

3.5SQ Replacement 3.5" square replacement inner & outer plastic rings only ( does not arms or screws ) (Hooptech)  $ 22.50 ea.
4.5SQ Replacement 4.5" square replacement inner & outer plastic rings only ( does not arms or screws ) (Hooptech)  $ 22.50 ea.
5.5SQ Replacement 5.5" square replacement inner & outer plastic rings only ( does not arms or screws ) (Hooptech)  $ 22.50 ea.
6.5SQ Replacement 6.5" square replacement inner & outer plastic rings only ( does not arms or screws ) (Hooptech)  $ 22.50 ea.
7.5SQ Replacement 7.5" square replacement inner & outer plastic rings only ( does not arms or screws ) (Hooptech)  $ 22.50 ea.

           HELPFUL HINT - Always remove any hoops or clamping systems before turning on the machine to prevent damage
to the presser foot and thread holder assembly.!!

 
Specialty Application Frames
 

Dog Collar / Karate Belt Hoop
This hoop will let you embroider directly on a dog collar, karate belt or  horse halter. It works on any Happy machine with a 360mm,
(14 inch ) needle distance.
Retail Price Only $280.00 each
(Part Number: HAP-14-DOG)

Military Name Tape Hoop
This hoop will allow for easy sewing on name tapes, particularly the continuous rolls.   It works with any Happy machine with a 360mm, 
(14 inch) needle distance
Retail Price Only $298.00 each
(Part Number: HAP-14-NAME TAPE)

 

 Adapter Bracket for using Brother PR600 Hoops On your Happy Voyager !

With this bracket you can use the frames from the Brother PR-600 on your Happy HCS Voyager. 
It mounts directly to the pantagraph in place of the tubular sash. It allows you to use the adapter from Brother to make use of the PR-600 hoops on your HCS Voyager. If you own a PR-600 and want the versatility of being able to use to use your Brother hoops on your Happy, this is a must have item.

Bracket for Brother PR-600 Frames - Retail Price Only $201.75 each
(Part Number: HCB40162)
To download additional information click HERE

   NOT ALL ITEMS ARE CARRIED IN STOCK
Items not is stock will be shipped directly from the manufacturer to your location. Additional shipping charges may apply.
 

     Click here to go back to the Accessories page
Items and Pricing are subject to change without prior notice