Contents / Quick Links
Click here to go back to the Accessories page
Click on a link below if you need to jump to a particular section on this page:

  Thread and Bobbins      Embroidery Needles     Embroidery Scissors   Backing, Topping & Stabilizer     3-D Embroidery Foam  

Pressure Feet, Bobbin Cases, & Misc. Supplies    Design Transfer Options   NEW!!!-> Disk Drive Replacement

Thread, Bobbins, & Bobbin Thread 

     See An Online Thread Color Chart !!!
Click HERE to see an online thread chart sorted by color number.

                     

High Sheen Polyester thread in 5000 meter cones in hundreds of rich colors! 

More on our ULT Rapos Thread
ULTRA RAPOS is the highest quality,  120Denier, 2-ply 880-gram tensile strength 40 weight thread available in the market.  All ULT RAPOS colors are filament dyed.  None are post-processed.  Because there is no over-dyeing, you get strong, quality thread for all colors, without variance from lot to lot. ULTRA- RAPOS thread has a high sheen for exceptional color and brilliance; it has the silk like shine of rayon and silk thread, yet with all the benefits of strength and durability of polyester thread. MADE IN JAPAN BY OZEKI, CO.

Retail Price Only

1 - 11 Cones  

   $ 6.95 ea.

12 - 23 Cones  

   $ 6.75 ea.

24 - 49 Cones  

   $ 6.50 ea.

50 - 99 Cones  

   $ 6.25 ea.

100 + Cones  

   $ 6.00 ea.

 
Rapos Starter Thread Kit - Retail Price Only $99.00


30 of the 2,000 Meter polyester starter thread cones to give a good selection of colors for your start up embroidery operation 
This kit contains 1 each the following colors:
1 Bright White, 101 Light Pink, 106 Burgundy Pink, 111 Medium Pink, 115 Candy Red, 116 Burgundy, 117 Dark Burgundy,

129 Dark Orange, 203 Bright Lemon, 205 Orange Gold, 206 Gold, 315 Dark Brown, 323 Dark Tan, 340 Medium Brown,

354 Light Peach, 395 Mushroom, 405 Medium Blue, 409 Dark Blue, 417 Vibrant Blue, 508 Medium Emerald, 510 Light Kelly,

533 Dark Blue/Green, 615 Purple, 707 Dark Grey, 900 Black, 1123 Pale Peach, 1208 Orange, 1430 Blue Grey,

1713 Barley Stone Grey, 1717 Charcoal Grey

Please use our online thread chart and look for the colors marked in RED to see exactly what colors come in the Starter thread kit.


ULT Rapos Thread Cone Sampler - Retail Price Only  $10.00
If you would like to try our Rapos polyester thread, we offer a sample pack that contains 7 of the primary colors most often ordered 
(Rapos 1 White, 204 Yellow, 405 Blue, 507 Kelly Green, 617 Dark Purple, 800 Scarlet Red, & 900 Black) 
On 500-meter cones in a pack to get you started

Rapos 1 Bright White Rapos 617 Dark Purple
Rapos 204 Yellow Rapos 800 Scarlet Red
Rapos 405 Medium Blue Rapos 900 Black
Rapos 507 Kelly Green

 

ULT- RAPOS Metallized Thread (sews like polyester - because it is !!!)
UltraRapos 100Denier,  2-ply, Mylar-wrapped thread has the look and shine of traditional metallic threads.  However, with its core of 2-ply polyester thread, it sews as easily as non-metallized thread.  Get the look of metallic without the sewing hassles of traditional metallic thread!  OVERSIZED NEEDLES ARE NOT NEEDED.  Fewer thread breaks! This item is a real problem solver!!     880 gram Tensile Strength ! ! 

Retail Price Only

G26 Metallized Gold $ 23.10 ea. / 5,000m cone 
G27 Metallized Silver $ 23.10 ea. / 5,000m cone
G28 Metallized Red $ 14.25 ea. / 2,000m cone

G29 Metallized Green

$ 14.25 ea. / 2,000m cone

G30 Metallized Blue

$ 14.25 ea. / 2,000m cone

Metallized Cone Sampler - Retail Price Only $10.00
If you would like to try our Rapos Metallized thread, we offer a Metallized Cone Sampler that contains 
all 5 of the colors on 500 meter cones.

About Our Metallic Colors
 Our metallized thread is a mylar-wrapped polyester that runs through the same needle as standard 40-weight polyester and rayon embroidery thread!  You can run it at higher speeds than traditional metallics, saving you a lot of time!  In addition, you'll find our prices are very competitive for both our polyester and metallized thread !

Click HERE to see an online thread chart sorted by color number.
 

 

PRE-WOUND  EMBROIDERY BOBBINS

Pre-Wound Embroidery Bobbins
Retail Price Only - Part Number

Coats & Clark Cardboard Sided Bobbins

 White Truesew Poly Continuous Filament Cardboard Side Bobbin (132 yards / bobbin)
 

$ 39.95 box of 144 bobbins (part# - embroidery bobbin)
 

$ 15.00 pack of 36 bobbins (part# - 36-embroidery bobbin)
 

$  4.15 pack of 12 bobbins (part# - 12-embroidery bobbin)

 Black Truesew Poly Continuous Filament Cardboard Side Bobbin (132 yards / bobbin)
 

$ 45.00 box of 144 bobbins (part# - 15L / 132 black)
 

$  4.25 pack of 12 bobbins (part# - 12-15L / 132 black)

 White Spun Poly With Cardboard Side Bobbin (114 yards / bobbin)
 

$ 28.50 box of 144 bobbins (part# - 120L / 114 white)
 

$  2.85 pack of 12 bobbins (part# - 12-120L / 114 white)

Robison Anton Cardboard Sided Bobbins

 White Continuous  Filament Poly Cardboard Side Bobbin (132 yards / bobbin)
 

$ 32.00 box of 144 bobbins (part# - mim bobbin)
 

$  3.40 pack of 12 bobbins (part# - 12-mim bobbin)

Fil-Tec Side-less Magnetic Core Bobbins

 White Fil-Tec Magnetic Core Bobbin Poly Continuous Filament (135 yards / bobbin)
 

$ 32.00 box of 100 bobbins (part# - mag bobbin w )
 

$  4.60 pack of 10 bobbins (part# - 10-mag bobbin w )

 Black Fil-Tec Magnetic Core Bobbin Poly Continuous Filament (130 yards / bobbin)
 

$ 35.00 box of 100 bobbins (part# - mag bobbin b )
 

$  4.80 pack of 10 bobbins (part# - 10-mag bobbin b )
 

 

Interested in Winding Your Own Bobbins?

We also carry Bobbin Thread on a cone if you want to wind your own bobbins. 
To wind your own bobbins you will need  a few metal bobbins ( MPZ00550 ) on hand and one anti-backlash spring (per head)  (ABLS ) to place in the bobbin case for winding your own.

White Fil-Tec Continuous Filament Bobbin Thread - 8200 yard cone 
(part# - BLTW ) - $ 9.25 per cone

Black Fil-Tec Continuous Filament Bobbin Thread - 8200 yard cone 
(part# - BLTB ) -$ 10.25 per cone

     

Click here to go back to the top.

     

Embroidery Needles

  To see an explanation about the different needles we carry and a listing of recommendations on what needles
and stabilizers to use with different materials please click HERE. 

 
GROZ-BECKERT & ORGAN EMBROIDERY NEEDLES
NEW - ALL NEEDLES AVAILABLE IN PACKS OF 10!!!!   Have a pack of each type  for specific sewing applications!!
Part Number

NEEDLE SIZE AND TYPE

 Retail Price Only
  75/11 Light ball point for unstable fabrics - Knits, Reverse Fleece - Perfect for 40 weight thread  

 DBXK5-FFG

 75/11 Light Ball Point - 100 Pack

$ 17.35 / (box - 100)

 10-DBXK5-FFG

 75/11 Light Ball Point - 10 Pack

$  2.65 /  (pack - 10)

 Teflon Coated "Cool Sew" Keeps needles free of build-up of sticking fibers and adhesives -Organ Brand
DB-K5 CS  75/11 Light Ball Point - 100 Pack

$ 17.35 / (box - 100)
10-DB-K5BPCS  75/11 Light Ball Point - 10 Pack

$  3.15 /  (pack - 10)
 

Titanium Nitride Coating - Longer Life - Dissipates Heat  -Groz-Beckert Brand

  

 GB-DBXK5-75

 75/11 Light Ball Point - 100 Pack

$ 23.50 / (box - 100)
10-GBDBXK5-75  75/11 Light Ball Point - 10 Pack $  3.60 /  (pack - 10)
     
  75/11 Sharp point for stable fabrics - Woven Fabrics, Caps, Etc. - Perfect for 40 weight thread - Groz-Beckert Brand   
DBXK5-75  75/11 Sharp Point - 100 Pack $ 17.35 / (box - 100)
10-DBK5-75  75/11 Sharp Point - 10 Pack $  2.65 / (pack - 10)

 Teflon Coated "Cool Sew" Keeps needles free of build-up of sticking fibers and adhesives -Organ Brand
DB-K5 CS  75/11 Sharp Point - 100 Pack $ 20.50 / (box - 100)
10-DBK5CS  75/11 Sharp Point - 10 Pack $  3.15 / (pack - 10)
 

Titanium Nitride Coating - Longer Life - Dissipates Heat - Groz-Beckert Brand

  

 GB-DBXK5-75

 75/11 Sharp Point - 100 Pack

$ 23.50 / (box - 100)
10-GBDBXK5-75  75/11 Sharp Point - 10 Pack $  3.60 /  (pack - 10)
     

80/12 Sharp Point is a thicker needle with a larger eye & thicker shank - Groz-Beckert Brand

 DBXK5-80

 80/12 Sharp Point - 100 Pack

$ 17.35 / (box - 100)
10-DBXK5-80  80/12 Sharp Point - 10 Pack $  2.65 /  (pack - 10)
 

Titanium Nitride Coating - Longer Life - Groz-Beckert Brand

  

 GB-DBXK5-80

 80/12 Sharp Point - 100 Pack

$ 23.50 / (box - 100)
10-GBDBXK5-80  80/12 Sharp Point - 10 Pack $  3.60 /  (pack - 10)
 

Use an 80/12 in place of a 75/11 when needle breaks occur on dense items

  
     
 

65/9 Needles are Perfect for 60 weight (thin) thread - Groz-Beckert Brand

  
 

Light ball point for unstable fabrics - Knits, Reverse Fleece

  
DBXK5-65FFG  65/9 Light Ball Point - 100 Pack $ 17.35 / (box - 100)
10-DBXK5-65FFG  65/9 Light Ball Point - 10 Pack $  2.65 /  (pack - 10)
 

Sharp point for stable fabrics - Woven Fabrics, Caps, Etc. 

  
DBXK5-65  65/9 Sharp Point - 100 Pack $ 17.35 / (box - 100)
10-DBXK5-65  65/9 Sharp Point - 10 Pack $  2.65 /  (pack - 10)
     
 

75/11 Narrow Wedge Point for light leather & vinyl by Organ

  

 DB-K5SS

 75/11 Narrow Wedge Point - 100 Pack (replaces DBXK5 SD)

$ 27.10 / (box - 100)
10-DB K5SS  75/11 Narrow Wedge Point - 10 Pack (replaces 10-DBXK5 SD) $  4.15 /  (pack - 10)
     
To see an explanation about the different needles we carry and a listing of recommendations on what needles
and stabilizers to use with different materials please click HERE. 
 

  Click here to go back to the top.    

Embroidery and Backing Scissors
 



EMBROIDERY SCISSORS

4" Curved Tip Titanium Scissors (Part Number: Embroidery Scissors) Retail Price Only $ 10.00 ea.   

  
4" SNIPS 

 4" Snips  (Part Number: SNIPS) Retail Price Only $ 6.50 ea.

         
  8" TITANIUM BENT HANDLE BACKING SCISSORS

(Part Number: Backing Scissors) Retail Price Only $ 12.00 ea.

     
     Click here to go back to the top.

 
Design Transfer Options

There is more than 1 way to get your designs from the computer to the machine!!!

 FLASH CARD & ADAPTER FOR HCS/HCD/HCR

Retail Price Only

256MB Compact Flash Card   (Requires one Compact Flash Adapter to operate)

 $ 29.95 ea.

Using Flash-type memory cards (the same kind found in many digital cameras) is a fast, convenient way to transfer designs into the HCS Voyager, HCD & HCR machines.  While we have seen cards up to 1Gb (1024Mb) work well, the official recommendation is 256Mb max, which is still large enough to hold thousands of average and large sized designs. (Requires one Compact Flash Adapter to operate)
to download a tip sheet on the flash card and adapter Click HERE

Compact Flash Adapter   (one required per machine)  $ 17.95 ea.

You'll need a PCMCIA Compact Flash adapter "sleeve" that the card fits into. This adapter "sleeve" allows the card to be inserted into the type of removable card slot found in laptops, which is the kind of slot on the side of the control panel where the card must be inserted.  
(note, the card CAN be inserted and/or removed while the machine is powered on and while sewing - 
just don't do this while a design is being transferred!) for the HCS Voyager, HCD & HCR machines. 

USB Memory Flash Drive 

Retail Price Only
Jump Drive - 1 Gigabyte USB memory flash drive  $ 19.95 ea

Many of the latest HCS Voyager, HCD & HCR Happy machines can use a USB Jump Drive ( also called a memory stick or flash drive ). 
The 1 GB Jump Drive will hold 4 times the amount of the 256mb Flash Card.  Using larger than 1GB not recommended!
 
        NO MORE FLOPPY DISKS  for your HCA, HCG, HCM, HMF & HM4 Happy Machines!!!!
     There is a replacement option for the floppy disk drive on your Happy machine !       NO MORE FLOPPY DISKS !

 USB FLOPPY DRIVE REPLACEMENT

 Retail Price Only
RP-USB-HAPPY - USB floppy drive simulator (replaces the EPZ00281 floppy disk drive) $ 375.00 ea

This direct replacement unit fits where your original floppy disk drive is now. You will now be able to use a 1GB USB jump drive (see above).
All you do is remove your existing floppy disk drive unit and replace it with the USB drive!!  You DON"T need a service tech to do this!!
Click HERE to download an installation tip sheet.

DIRECT CONNECT CABLE

 Retail Price Only
CSC-25 - 25 ft Cross-Serial cable for the HCA and HCG embroidery machines with color monitor control panel only  $ 75.00 ea

You can connect you machine directly to your computer using this direct connect cable and the Happy Link software (version 3.05) 
that you can download for free from happyemb.com. Click Here
   Click HERE to download instructions for installing and using this cable.  ( will not work with the older standard control panel )
Click here to go back to the top.
 
Embroidery Backings and Toppings
GREAT EMBROIDERY STARTS WITH EXCELLENT STABILIZATION!!    
Our Embroidery Backings are USA made by Ahlstrom using the WET LAID manufacturing process, insuring 360degree stability!!

We have a backing swatch booklet with a sample of each of the stabilizers and toppings we offer  that is available upon request.

CUTAWAY BACKINGS - PERFORATED ROLLS

Retail Price Only

Part Number - Weight and Size

C498 7.5 x 7.5            3.0 Oz White Cutaway 7.5" x 7.5" Squares - 480 Sheets Perforated on a 100 yd roll 

 $ 23.00 ea.

C498 7.5 x 7.5 Black  3.0 Oz Black Cutaway 7.5" x 7.5" Squares - 480 Sheets Perforated on a 100 yd roll
Eliminates shadow effect on darker colors!!     Insures maximum stabilization.     SOFT!!

 $ 28.50 ea.

C498 23 x 20              3.0 Oz White Cutaway 23" x 20" Squares - 39 Sheets Perforated on a 25 yd roll  

 $ 24.00 ea.

C824 14.75                 2.0 Oz White Cutaway 14.75" x 14.75" Squares - 244 Sheets Perforated on a 100 yd roll  

  $ 42.00 ea.

C824 14.75 Black       2.0 Oz Black Cutaway 14.75" x 14.75" Squares - 244 Sheets Perforated on a 100 yd roll  
Eliminate shadow effect on darker colors!!     Insures maximum stabilization.     SOFT!!   

  $ 48.50 ea.

C315 7.5 x 8               1.5 Oz Mesh White Cutaway 7.5" x 8" Squares - 480 Sheets Perforated on a 100 yd roll  
100% Nylon - Very Soft, see through, minimizes shadow effect of heavier cutaway, Perfect for high stitch counts!!

 $ 31.00 ea.
   

CUTAWAY BACKINGS - INDIVIDUALLY DIE CUT SHEETS

Retail Price Only

Part Number - Weight and Size
3ozC                   3.0 Oz White Cutaway 7.5" x 7.5" Square Die Cut 50 Pack  $  3.80 ea.
3ozC Black         3.0 Oz Black Cutaway 7.5" x 7.5" Square Die Cut 50 Pack
Eliminate shadow effect on darker colors!!     Insures maximum stabilization.     SOFT!!   		  $  4.00 ea.
3ozC 250             3.0 Oz White Cutaway 7.5" x 7.5" Square Die Cut 250 Pack  $ 12.85 ea.
3ozC 250 Black   3.0 Oz Black Cutaway 7.5" x 7.5" Square Die Cut 250 Pack
Eliminate shadow effect on darker colors!!     Insures maximum stabilization.     SOFT!!   		  $ 15.85 ea.
                                                                                                            

CUTAWAY BACKINGS - CONTINUOUS ROLLS

Retail Price Only

Part Number - Weight and Size
3ozCW         3.0 Oz White Cutaway 23" wide on a 12 yd Continuous roll      CUT IT TO YOUR REQUIRED SIZE  $ 20.30 ea.
3ozCB          3.0 Oz Black Cutaway 23" wide on a 12 yd Continuous roll      CUT IT TO YOUR REQUIRED SIZE  $ 20.70 ea.
2ozC20X25   2.0 Oz White Cutaway 20" wide on a 25 yd Continuous roll      CUT IT TO YOUR REQUIRED SIZE  $ 17.50 ea.
   

TEARAWAY CAP BACKINGS - INDIVIDUALLY  DIE CUT SHEETS

Retail Price Only

Part Number - Weight and Size

25ozT50          2.5 Oz White Tearaway for Caps 4" x 19" Die Cut 50 Pack

  $  5.50 ea.
25ozT250        2.5 Oz White Tearaway for Caps 4" x 19" Die Cut 250 Pack    $ 19.50 ea.

T611 4 x 7       2.5 Oz White Tearaway for Caps 4" x 7" Die Cut 500 Pack    

  $ 15.00 ea.
   

TEARAWAY CAP BACKINGS - CONTINUOUS ROLLS

Retail Price Only

Part Number - Weight and Size

T611 4 x 100   NEW!! 2.5 Oz White Tearaway for Caps 4" x 100 yd continuous roll  You Cut to desired size  

  $ 15.00 ea.

T611 4 x 200   NEW!! 2.5 Oz White Tearaway for Caps 4" x 200 yd continuous roll  You Cut to desired size   

  $ 27.50 ea.

 

  

 TEARAWAY BACKINGS - PERFORATED ROLLS

Retail Price Only

Part Number - Weight and Size

T633 7.5 x 7.5   1.8 Oz White Tearaway 7.5" x 7.5" Squares - 480 Sheets Perforated on a 100 yd roll
                                 Soft feel, can be used against the skin without irritation!!

 $ 20.00 ea.

T633 14.75        1.8 Oz White Tearaway 14.75" x 14.75" Squares - 244 Sheets Perforated on a 100 yd roll
                                Soft feel, can be used against the skin without irritation!!

  $ 38.40 ea.

 

  

TEARAWAY BACKINGS - INDIVIDUALLY DIE CUT SHEETS

Retail Price Only

Part Number - Weight and Size
18ozT         1.8 Oz White Tearaway 7.5" x 7.5" Square Die Cut 50 Pack
                                Soft feel, can be used against the skin without irritation!!		  $ 2.85 ea.
18ozT 250   1.8 Oz White Tearaway 7.5" x 7.5" Square Die Cut 250 Pack
                                Soft feel, can be used against the skin without irritation!!		  $ 9.00 ea.
   

TEARAWAY BACKINGS - CONTINUOUS ROLLS

Retail Price Only

Part Number - Weight and Size

T633 23x25     1.8 Oz White Tearaway 23" wide on a 25 yd continuous roll  (non-perforated)
                                   Soft feel, can be used against the skin without irritation!!

  $ 20.00 ea.

T678B 23x25   1.5 Oz Black Tearaway 23" wide on a 25 yd continuous roll  (non-perforated)
            Great for use with color sensitive projects - Soft feel, can be used against the skin without irritation!!

  $ 18.75 ea.

T611 20x100    2.5 Oz White Tearaway 20" wide on a 100 yd continuous roll  (non-perforated)
 NEW ITEM - Firm Tearaway  -Perfect for Vinyl Boat Cushions or any stable projects with high stitch counts !!

  $ 55.00 ea.
   

ADHESIVE TEARAWAY BACKING - "STICKY BACKING" CONTINUOUS ROLL

Retail Price Only

Part Number - Weight and Size

PNT 9.75x25    1 Oz Adhesive White Tearaway 9.75" wide on a 25 yd continuous roll  (non-perforated) with release paper
with release paper for use with Hooptech Quick Change or Fast Frames. Adhesive backing eliminates the need for water activated adhesive stabilizers or spray adhesives. *   ALSO KNOWN AS "STICKY BACKING"

  $ 23.75 ea.

 * Please use Hookwash ($13.95) on a regular basis when using sticky backing or adhesive spray. If you are not using Hookwash as a part of your regular maintenance, expect a build up of adhesive residue in your rotary hook, which will cause service issues.

 

TEARAWAY / WASHAWAY BACKINGS - CONTINUOUS ROLLS

Retail Price Only

Part Number - Weight and Size

EB160 8"x10yd   2 Oz White Tearaway / Washaway 8" wide on a 10 yd continuous roll  (non-perforated) 
Ideal for towels & linens, disappears after washing!  Eco Friendly  - Use underneath project as a backing - NOT as a topping

  $  8.75 ea.

EB160 20x25       2 Oz White Tearaway / Washaway 20" wide on a 25 yd continuous roll  (non-perforated) 
Ideal for towels & linens, disappears after washing!  Eco Friendly  - Use underneath project as a backing - NOT as a topping

  $ 27.00 ea.
EB160 Water Soluble Backing - Completely washes away and leaves no residual backing. 
Made from PVA (Poly Vinyl Alcohol), which is also used in Capsules and Tablets for Human Consumption.
 

WATER SOLUBLE TOPPINGS

Retail Price Only

Part Number - Weight and Size

8" x 110 YDS   Water Soluble Toppings 8" x 8" Squares - 495 Sheets Perforated on a 110 yd roll  

 $ 40.00 ea.
2012S              Water Soluble Toppings 20" wide on a 12 yd continuous roll (non-perforated)  $ 17.80 ea.
WS20X25         Water Soluble Toppings 20" wide on a 25 yd continuous roll (non-perforated)  $ 23.00 ea.
   
All of our Ahlstrom supplied Tearaway & Cutaway Backings are manufactured employing the wet-laid process, insuring multi-directional stability and uniform density. 
GREAT EMBROIDERY STARTS WITH EXCELLENT STABILIZATION!

To see a listing of recommendations on what needles and stabilizers to use with different materials 
Please click HERE. 

     
     Click here to go back to the top.

 
3-D Foam

Make your embroidery come to life by using puffy embroidery foam under your design to give it a cool 3-D effect.              Embroidery Foam comes in 2mm and 3mm thickness on 12” by 18” sheets.  Try some and experiment!!

2 mm Embroidery Foam

Retail Price Only
  Black - 2 mm Embroidery Foam in 12” x 18” sheets ( Part# BFOAM2 ) $ 1.40 per sheet
  Forest Green - 2 mm Embroidery Foam in 12” x 18” sheets ( Part#  FGFOAM2 ) $ 1.40 per sheet
  Grey - 2 mm Embroidery Foam in 12” x 18” sheets ( Part# GFOAM2 ) $ 1.40 per sheet
  Royal Blue - 2 mm Embroidery Foam in 12” x 18” sheets ( Part#  RBFOAM2 ) $ 1.40 per sheet
  Red - 2 mm Embroidery Foam in 12” x 18” sheets ( Part#  RFOAM2 ) $ 1.40 per sheet
  Tan - 2 mm Embroidery Foam in 12” x 18” sheets ( Part#  TFOAM2 ) $ 1.40 per sheet
  White - 2 mm Embroidery Foam in 12” x 18” sheets ( Part#  WFOAM2 ) $ 1.40 per sheet
  Yellow - 2 mm Embroidery Foam in 12” x 18” sheets ( Part#  YFOAM2 ) $ 1.40 per sheet

3 mm Embroidery Foam

Retail Price Only
  Black - 3 mm Embroidery Foam in 12” x 18” sheets ( Part#  BFOAM3 ) $ 1.95 per sheet
  Dark Blue - 3 mm Embroidery Foam in 12” x 18” sheets ( Part# DBFOAM3 ) $ 1.95 per sheet
  Grey - 3 mm Embroidery Foam in 12” x 18” sheets ( Part# GFOAM3 ) $ 1.95 per sheet
  Royal Blue - 3 mm Embroidery Foam in 12” x 18” sheets ( Part# RBFOAM3 ) $ 1.95 per sheet
  Red - 3 mm Embroidery Foam in 12” x 18” sheets ( Part#  RFOAM3 ) $ 1.95 per sheet
  Tan - 3 mm Embroidery Foam in 12” x 18” sheets ( Part#  TFOAM3 ) $ 1.95 per sheet
  White - 3 mm Embroidery Foam in 12” x 18” sheets ( Part#  WFOAM3 ) $ 1.95 per sheet
  Yellow - 3 mm Embroidery Foam in 12” x 18” sheets ( Part#  YFOAM3 ) $ 1.95 per sheet

To download a page with tips for using Embroidery Foam click HERE

 Click here to go back to the top.

   

Pressure Feet, Bobbin Cases & Other Miscellaneous Supplies
 

TOOLS

Retail Price Only

Lint Brush  - Double Ended Nylon Lint Brush - especially useful for getting into the nooks and crannies of the hard to
          reach places on your machine such as the knife blades and bobbin case/rotary hook areas -Keeps Machinery Clean !!		 $  1.25 ea.
TWE6 - Deluxe 6" Bent Tweezers $  2.95 ea.
4" curved Titanium Embroidery Scissors $ 10.00 ea.
4" snips  SNIPS $  6.50 ea
8" Titanium Bent Handle Backing Scissors $ 12.00 ea
M0404342 - 17.5 Needle Depth Gauge for all Happy Machines with "L Style" Rotary Hooks       Essential Tool! $ 23.05 ea
TTG -  Top Thread Tension Gauge (for accurately determining correct upper thread tensions)    Essential Tool!
                                                                             (No More Guessing)!!            TTG Instructions click HERE  		$ 19.75 ea
BTG - Bobbin Case Tension Gauge (Place Bobbin Case with thread into device for determining correct  
          bobbin thread tension) BTG Instructions click HERE  This is for "L Style Bobbin Cases" 		$ 82.99 ea
Helicoil Kit  - 10 Replacement helicoils and Insert Tools to repair damaged threads on the HCA/HCG/HCM/HCR
Tubular and Cap Sashes.  M4 X .7 size helicoils   Use when M4 (4mm JIS Metric Bolts) are loose in your Sashes!		 $ 60.00 ea
Helicoil - Replacement M4 X 0.7 X 1.5mm Stainless Steel Helicoil Inserts for use with Helicoil Kit $  0.90 ea.
WSAS - Antistatic Wrist Strap with Grounding Wire - If YOU are changing ANY circuit board/s on your embroidery machine, remember that Static Electricity is a KILLER OF CIRCUIT BOARDS!! By using this wrist strap and grounding yourself to the machine frame, you will insure that any static electricity will be harmlessly discharged and will not destroy the $circuit board. $11.95 ea

OILS, ADHESIVES, ETC.

Retail Price Only

ZS011 - Needle Oiler  with plastic extension tube and 4 fluid ounces of Stainless Machine Oil   REFILLABLE! $  2.50 ea.
OIL-QUART - Replacement quart of Stainless Machine Oil to refill your needle oiler   (32 fluid ounces of oil) $  9.50 ea.
KK100 - Spray Adhesive for appliquι and maximum registration.  ( replaces the 505 ) 18 fluid ounces $ 14.95 ea.
LB5 - Spray Lubricant for hassle free oiling (non staining) Each spray delivers one drop (750 micro liter) to insure
that you will never under or over oil your machine. Eliminates oil from getting on your projects. 		$  8.35 ea.
LOCTITE - Medium Strength (Blue) Thread Locker 2.5ml bottle Keeps screws, nuts and bolts securely fastened   $  7.95 ea.
HOOKWASH - Lubricant / Solvent spray for removing residual adhesive from needle & rotary hook from use of sticky backings or adhesive sprays. Spray on new rotary hooks to remove preserving oil before regular oiling.
                        Please click HERE to download tips on using Hookwash.     11 fluid ounces with extension tube 		$ 13.95 ea.

THUMB SCREWS FOR TUBULAR SASHES AND CAP DRIVERS

Retail Price Only

HCB43220 - Silver Thumbscrew for HCS Voyager tubular sash and new style cap driver (M5 x 15) $ 4.30 ea.
HCS43141 - Knob Bolt ( with thumbscrew ) for HCS Voyager new style cap driver $ 3.95 ea.
HCD37090 - Silver Thumb Screw for HCD tubular sash & cap driver (M4 x 12) $ 4.30 ea
M0437002 - Blue Thumb Screw for Happy HCA, HCG, HCM, HMF, EM3 & EM4 
                  (does not work on HCD, HCS or HCR) -  (makes switching between cap & tubular sashes a snap! )  		$ 1.25 ea.

BOBBINS & BOBBIN CASES *     Have at LEAST ONE (1) spare in YOUR TOOLBOX!

Retail Price Only

MPZ00080-T - Towa "L Style" Bobbin Case (for HAPPY HCA/HCG/HCM/HMF) - (replaces MPZ01810) 
The Industry Standard Japanese made OEM Best quality & performance (does not work on HCS, HCD or HCR)
Will also work with Brother PR600, PR620 & Baby Lock BMP6		 $  8.00 ea.
MPZ00080 - "L Style" Generic Bobbin Case (for HAPPY HCA/HCG/HCM/HMF) (replaces MPZ01810) 
(does not work on HCS, HCD or HCR) Have at least ONE spare per head at ALL times!!      BE PREPARED!
Will also work with Brother PR600, PR620 & Baby Lock BMP6		 $  5.75 ea.
HSA04030 - Bobbin Case (for HAPPY HCS, HCD and HCR) "L Style"  - Have at least ONE spare at ALL times!! $ 12.00 ea.
MPZ00550 - Metal Bobbin (for use when winding your own bobbins) "L Style" requires ONE Anti-backlash Spring $  0.70  ea.
ABLS - Anti-backlash Spring (for use with MPZ00550 when winding your own bobbins) "L Style" $  0.75  ea.

*If you are NOT in possession of a spare Bobbin Case, your machine will be DOWN if it fails. Avoid expensive Next Day Air Charges
This Is The Most commonly ordered Consumable Part!   Check YOUR Stock to avoid down time !

          ROTARY HOOKS **      Have at LEAST ONE (1) spare in YOUR TOOLBOX!

Retail Price Only

MPZ01290 - Stainless Steel Rotary Hook (non-Teflon) (requires daily oiling) (for HAPPY HCA/HCG/HCM/HMF) "L Style" $ 39.75 ea.
HSA04010 - Stainless Steel Rotary Hook (non-Teflon) for HCS, HCD and HCR Only! "L Style"  $ 49.95 ea. 
MPZ01260 - Teflon Rotary Hook (does not require oiling) (for HAPPY HCA/HCG/HCM/HMF)  "L Style" $ 49.95 ea.

 **If you are NOT in possession of a spare Bobbin Case, your machine will be DOWN if it fails. Avoid expensive Next Day Air Charges
This Is The Most commonly ordered Consumable Part!   Check YOUR Stock to avoid down time !

PRESSER FEET ***  (Please refer to your parts manual and advise us of the correct part number)

Retail Price Only

                                                     Have at LEAST ONE (1) spare in YOUR TOOLBOX!
HCB13200 - Presser foot for HCS Voyager machine, 2 mounting holes $  7.15
HCB13380 - Presser foot for HCS Voyager machine, 3 mounting holes $  7.15
SNR13130 - Presser foot for HCD, HCR machine (replaces HMG13630)  - Includes one HMF12111 Nylon Insert $ 10.75
HMF12300 - Presser foot   Includes two HMF12111 Nylon Insert $ 12.35
HMG12750 - Presser foot (4mm dia eye, replaces HMG912060)   Includes two HMF12111 Nylon Insert $  8.50
M0412234 - Presser foot  Rides directly on Needle Bar, contains no Nylon Inserts $  7.15
HMF12111 - Nylon Insert Bushings for Presser Foot  (Replace when Presser Foot wobbles- simple fix!) (same as HMF12112) $  2.30

*** If you are NOT in possession of at LEAST one extra Presser Foot, you will lose the ability to be able to sew on one needle.
In the case of the HCS Voyager, you will not be able to sew at all - This machine has a single Presser Foot for all 12 needles !
Consumable Part !!  Avoid being DOWN !!

PEGGY'S STITCH ERASER

Retail Price Only

Peggy's Stitch Eraser - removes unwanted stitches quickly! - Much faster than using manual Seam Ripper!! $ 79.95 ea.
2078 Replacement Blade   for Peggy's Stitch Eraser - Have a spare to replace original when it wears out $ 21.95 ea.

THREAD NETTING - (THREAD STABILIZER)

Retail Price Only

Thread Netting - Pack   15 pieces - 4" long  - Perfect size for Rapos Cones - Keeps thread from sloughing off of cones -                                     Particularly useful when transporting or moving machines! $  4.50 / pack
Thread Netting - Yard  (cut it yourself for various types of thread)  Keeps thread from sloughing off of cones $  1.25 / yard

   PLASTIC SPRING  -  (THREAD STABILIZER)

Retail Price Only

HSA20010 to be used on HCS. One per thread cone required to hold thread cones firmly against the felt to keep loose thread from getting trapped between bottom of cone and felt.  (12 required per machine) To be mounted on Thread Stand Pin before putting cone of thread on machine - A  Must Have for HCS Voyager - Eliminates Annoying Thread Breaks!! $ 0.90 ea.

   ABRASIVE CORD               Essential Tool!

Retail Price Only

Abrasive Cord - 12 Foot Spool of Sandpaper On A String for getting rid of needle scratches on both the Presser Feet and
Needle Plates.   Extends the life of these critical parts as well as keeping thread from shredding!!      SAND & SAVE!!      		$ 6.95 ea.
      

5421 ULTRA TAPE for the Happy Sash & Hooptech Clamps

Retail Price Only

5421 ULTRA TAPE - 16.45 meter (18 yard) rolls $ 54.00 / roll
5421 ULTRA TAPE-YDS - sold by the yard $  3.25 / yard

Use this Polyethylene tape on the bottom of the tubular sash to keep it from scratching the embroidery arm 
(or table for flat sewing applications)  25mm (1 in) wide and available by the roll or by the yard.

EMBROIDERY TOUCH UP PENS

Retail Price Only

Touch Up Pens - Set of 8 primary colors (black, blue, brown, green, orange, purple, red and yellow) fine point for
embroidery application    Not affected by chlorine or UV radiation - Permanent marker		 $ 18.79 / set

TOOL KIT

Retail Price Only

Tool Kit for HCS $ 85.90 ea.
1 - #2 phillips screwdriver; 1 - 3mm allen wrench;  1 - 2.5mm allen wrench;  1 - 90deg straight blade screw driver;
1 - 2mm straight blade screwdriver; 1 - M0404342 needle depth gauge; 1 - replacement lever handle; 1 - fuse 6A; 
1 - small cleaning brush; 10 - 75/11 light ballpoint needles

Front Cover for HCS Voyager

Retail Price Only
Tinted Plastic Front Thread Cover with Upgraded Metal Hinge ( close up of hinge )
( replacement for the HCB16464 with plastic hinge ) - To download the installation instructions please click HERE		 $ 40.30 ea.
There is more than 1 way to get your designs from the computer to the machine!!!

Flash Card / Adapter for HCS/HCD/HCR

Retail Price Only

256MB Compact Flash Card  (Requires one Compact Flash Adapter to operate) $ 29.95 ea.

Using Flash-type memory cards (the same kind found in many digital cameras) is a fast, convenient way to transfer designs into the HCS Voyager, HCD & HCR machines.  While we have seen cards up to 1Gb (1024Mb) work well, the official recommendation is 256Mb max, which is still large enough to hold thousands of average and large sized designs. (Requires one Compact Flash Adapter to operate)
to download a tip sheet on the flash card and adapter Click HERE

Compact Flash Adapter  (one required per machine) $ 17.95 ea.

You'll need a PCMCIA Compact Flash adapter "sleeve" that the card fits into. This adapter "sleeve" allows the card to be inserted into the type of removable card slot found in laptops, which is the kind of slot on the side of the control panel where the card must be inserted.  
(note, the card CAN be inserted and/or removed while the machine is powered on and while sewing - 
just don't do this while a design is being transferred!) for the HCS Voyager, HCD & HCR machines. 

USB MEMORY FLASH DRIVE 

Retail Price Only

Jump Drive - 1 Gigabyte USB memory flash drive $ 19.95 ea

 HCS Voyager, HCD & HCR Happy machines can use a 1GB USB Jump Drive ( also called a memory stick or flash drive ). 
The 1GB Jump Drive will hold 4 times the amount of the 256mb Flash Card. Using larger than 1GB not recommended!
If your machine does not have USB capability, there are upgrade kits available.    Call or email us for quote.

NEW!         NO MORE FLOPPY DISKS  for your HCA, HCG, HCM, HMF & HM4 Happy Machines!!!!

FINALLY !!      There is a replacement option for the floppy disk drive on your Happy machine !       NO MORE FLOPPY DISKS !

USB FLOPPY DRIVE REPLACEMENT

Retail Price Only

RP-USB-HAPPY - USB floppy drive simulator (replaces the EPZ00281 floppy disk drive) $ 375.00 ea

This direct replacement unit fits where your original floppy disk drive is now. You will now be able to use a 1GB USB jump drive (see above).
All you do is remove your existing floppy disk drive unit and replace it with the USB drive!!  You DON"T need a service tech to do this!!
Click HERE to download an installation tip sheet.

DIRECT CONNECT CABLE

Retail Price Only

CSC-25 - 25 ft Cross-Serial cable for the HCA and HCG 12 and 15 needle embroidery machines 
              with color monitor control panel only 		$ 75.00 ea

You can connect you machine directly to your computer using this direct connect cable and the Happy Link software (version 3.05) 
that you can download for free from happyemb.com. Click Here
   Click HERE to download instructions for installing and using this cable.  ( will not work with the older standard control panel )

MACHINE STAND

Retail Price Only

The best mobile stand available for your HCS & HCD machine.

 $ 395.00 ea

This embroidery stand is supplied with 4 locking casters to insure maximum stability. The height is adjustable from 29.75" to 35.25". The table top is 29" deep by 34" wide, with a 16" by 24" adjustable shelf underneath. Ships unassembled (wt. 88 lbs) with instructions and hardware. (click here to download assembly instructions) Here are some pics - angle view - side view - front view  

MANUALS

  

If you are needing a manual for your machine please contact our parts dept and we can email you a manual in PDF format.     
* IMPORTANT: These manuals are specific to each machine type. 
Be sure to specify model number and machine number of machine when ordering!

WE ALSO HAVE AVAILABLE SOME OPERATING/PARTS MANUALS  THAT ARE PRINT VERSIONS -  CALL!

    
    Click here to go back to the Accessories page

Items and Pricing are subject to change without prior notice