|
TOOLS |
Retail Price Only
|
Lint Brush - Double Ended Nylon
Lint Brush - especially useful for getting into the nooks and
crannies of the hard to
reach places on your machine such as the
knife blades and bobbin case/rotary hook areas -Keeps Machinery
Clean !! |
$ 1.25 ea. |
| TWE6
- Deluxe 6" Bent Tweezers
|
$ 2.95 ea. |
| Embroidery
Scissors - 4" curved Titanium
Embroidery Scissors |
$ 10.00 ea.
|
| SNIPS
- 4" snips
|
$ 6.50 ea
|
|
Backing
Scissors
-
8" Titanium Bent Handle
|
$ 12.00 ea
|
|
M0404342 - 17.5 Needle Depth Gauge
for all Happy Machines with "L Style" Rotary Hooks
Essential
Tool!
|
$ 23.05 ea
|
TTG -
Top Thread Tension Gauge (for accurately determining
correct upper thread tensions)
Essential
Tool! (No More Guessing)!! TTG
Instructions click HERE
|
$ 19.75 ea
|
BTG
- Bobbin Case Tension Gauge (Place Bobbin Case with thread into device for determining
correct
bobbin
thread tension) BTG Instructions click HERE
This is for "L Style Bobbin Cases"
|
$ 82.99 ea
|
Helicoil Kit -
10 Replacement helicoils and
Insert Tools to repair damaged threads on
the HCA/HCG/HCM/HCR
Tubular and Cap Sashes.
M4 X .7 size helicoils Use when M4 (4mm JIS Metric Bolts) are loose in your Sashes! |
$ 60.00 ea
|
| Helicoil -
Replacement M4 X 0.7 X
1.5mm Stainless Steel Helicoil Inserts for use with Helicoil Kit
|
$ 0.90 ea.
|
|
WSAS
- Antistatic Wrist Strap with Grounding
Wire - If YOU are changing ANY circuit
board/s on your embroidery machine, remember that Static Electricity
is a
KILLER OF CIRCUIT BOARDS!
By using this wrist strap and grounding yourself to the machine
frame, you will insure that any static electricity will be
harmlessly discharged and will not destroy the circuit board. |
$11.95 ea |
|
|
|
|
LUBRICANTS,
ADHESIVES, ETC.
|
Retail Price Only
|
| ZS011 -
Needle Oiler with plastic extension tube and 4 fluid ounces of
Stainless Machine Oil REFILLABLE! |
$
3.50 ea.
|
| OIL-QUART
- Replacement
quart of Stainless Machine Oil to refill your needle oiler (32 fluid
ounces of oil)
|
$ 9.50 ea.
|
LB5 -
Spray Lubricant for hassle free oiling (non staining) Each spray
delivers one drop (750 micro liter) to insure
that you will never under or over oil your machine. Eliminates oil
from getting on your projects.
|
$ 8.85
ea.
|
|
Sale->
ALBA-5 Embroidery Lubricant -
6.84 OZ. Aerosol can-Crystal clear mineral oil/delivers a measured
dose per spray/ will no drip or run/ eliminates staining from
over-application of oil/ use on all machinery. Made in the USA.
|
$ 5.95 ea. |
| KK100 -
Spray Adhesive for appliqué and maximum registration. ( replaces the
505 ) 18 fluid ounces
|
$ 14.95 ea.
|
|
Sale->
1076 Embroidery Adhesive - 10
OZ. Aerosol Can - Spray Adhesive
for Appliqué - Made in the USA.
|
$
6.95 ea.
|
|
LOCTITE -
Medium
Strength (Blue) Thread Locker 2.5ml bottle
Keeps screws, nuts and bolts securely fastened
|
$ 7.95 ea.
|
Sale-> HOOKWASH - Solvent spray for removing residual adhesive from needle & rotary
hook from use of sticky backings
or adhesive sprays. Spray on new rotary
hooks to remove preserving oil before regular oiling.
Please click HERE
to download tips on using Hookwash. 11 fluid
ounces with extension tube
|
$ 12.50 ea.
|
1062 Powder Spot Remover
-12.5 OZ. -This is designed to easily remove tough stains from all types
of fabrics without harming delicate fibers. Spray on - Let dry - brush off. This has a low odor and will not
ring and dries quickly.
Use on silk, satin, cotton. wool, taffeta, polyester,
blends and all other fabrics. Made in the USA. |
$ 6.95 ea. |
|
DUSTER
-10 OZ. Canned Air -Use to keep bobbins & rotary hooks, thread tensioners
and thread cutting devices lint free. Great for blowing the dust
out of computers and electronic devices. Contains no CFC's,
Non-flammable, OZONE SAFE ! |
$
5.99 ea. |
|
THUMB SCREWS FOR
TUBULAR SASHES AND CAP DRIVERS |
Retail Price Only
|
|
HCB43220 - Silver
Thumbscrew for HCS
Voyager tubular sash and new style cap driver (M5 x 15) |
$ 4.30 ea.
|
|
HCS43141
- Knob Bolt ( with thumbscrew ) for HCS
Voyager new style cap driver
|
$ 3.95 ea.
|
|
HCD37090 - Silver
Thumb Screw for HCD tubular sash & cap driver (M4 x 12) |
$ 4.30 ea
|
M0437002
- Blue Thumb Screw for
Happy HCA, HCG, HCM, HMF, EM3 & EM4
(does not work on HCD, HCS
or HCR) - (makes switching
between cap & tubular sashes a snap! )
|
$ 1.25
ea.
|
|
|
|
|
BOBBINS & BOBBIN CASES
* Have at
LEAST ONE (1)
spare in YOUR
TOOLBOX! |
Retail Price Only
|
MPZ00080-T - Towa "L Style"
Bobbin
Case (for HAPPY
HCA/HCG/HCM/HMF) -
(replaces MPZ01810)
The Industry Standard Japanese made
OEM Best quality & performance (does not work on HCS,
HCD or HCR)
Will also work with Brother PR600, PR620 & Baby Lock BMP6 |
$ 8.00
ea.
|
MPZ00080
- "L Style" Generic Bobbin Case
(for HAPPY
HCA/HCG/HCM/HMF) (replaces MPZ01810)
(does not
work on HCS, HCD or HCR) Have at least ONE
spare per head at ALL times!!
BE PREPARED!
Will also work with Brother PR600,
PR620 & Baby Lock BMP6 |
$ 5.75
ea.
|
| HSA04030
- Bobbin Case (for HAPPY HCS,
HCD and HCR) "L Style" -
Have at least ONE
spare at ALL times!!
|
$ 12.00 ea.
|
| MPZ00550
- Metal Bobbin (for use
when winding your own bobbins) "L Style" requires ONE
Anti-backlash Spring
|
$ 0.70
ea.
|
|
ABLS
- Anti-backlash Spring (for use
with MPZ00550 when winding your own bobbins) "L Style"
|
$ 0.75
ea.
|
|
*If you are NOT
in possession of a spare Bobbin Case, your machine will be
DOWN if it fails. Avoid
expensive Next Day Air Charges
This Is The Most commonly ordered
Consumable Part! Check YOUR
Stock to avoid down time ! |
|
ROTARY HOOKS ** Have
at LEAST ONE (1) spare in
YOUR TOOLBOX! |
Retail Price Only
|
|
MPZ01290
- Stainless Steel Rotary Hook (non-Teflon)
(requires daily oiling) (for HAPPY HCA/HCG/HCM/HMF) "L
Style"
|
$ 39.75 ea.
|
| HSA04010
- Stainless Steel Rotary Hook (non-Teflon)
for HCS, HCD and HCR Only! "L Style"
|
$ 49.95 ea.
|
| MPZ01260
- Teflon Rotary Hook (does not
require oiling) (for HAPPY HCA/HCG/HCM/HMF) "L Style"
|
$ 49.95 ea.
|
|
**If you are NOT
in possession of a spare Rotary Hook, your machine will be
DOWN if it fails. Avoid
expensive Next Day Air Charges
This Is The Most commonly ordered
Consumable Part! Check YOUR
Stock to avoid down time ! |
|
PRESSER FEET
*** (Please refer to
your parts manual and advise us of the correct part number)
|
Retail Price Only
|
|
Have
at LEAST ONE (1) spare in
YOUR TOOLBOX! |
|
| HCB13200
- Presser foot for HCS Voyager
machine, 2 mounting holes
|
$ 7.15
|
| HCB13380
- Presser foot for HCS Voyager
machine, 3 mounting holes
|
$ 7.15
|
|
SNR13130
- Presser
foot for HCD, HCR machine (replaces HMG13630) - Includes one HMF12111
Nylon Insert
|
$ 10.75
|
|
HMF12300
- Presser foot Includes two HMF12111 Nylon Insert
|
$ 12.35
|
|
HMG12750
- Presser foot (4mm dia eye, replaces
HMG912060) Includes two HMF12111 Nylon Insert
|
$ 8.50
|
|
M0412234
- Presser foot Rides directly on Needle Bar, contains no Nylon Inserts
|
$ 7.15
|
|
HMF12111 - Nylon
Insert Bushings for Presser Foot (Replace when Presser Foot wobbles- simple fix!)
(same as HMF12112)
|
$ 2.30
|
|
*** If you are NOT in
possession of at LEAST one extra Presser Foot, you will lose the
ability to be able to sew on one needle.
In the case of the HCS
Voyager, you will not be able to sew at all - This machine has a
single Presser Foot for all 12 needles !
Consumable Part !! Avoid being DOWN !! |
|
PEGGY'S STITCH ERASER |
Sale Price |
Sale-> Peggy's Stitch Eraser
- removes unwanted stitches quickly! -
Much
faster than using manual Seam Ripper!!
Free Lint Brush with a Stitch Eraser |
$
75.95 ea.
|
|
Sale-> 2078 Replacement Blade - for
Peggy's Stitch Eraser - Have a spare to replace original when it wears out
|
$ 20.85 ea.
|
|
|
|
|
THREAD NETTING
- (THREAD STABILIZER)
Keeps thread from
sloughing off of cones - Particularly useful when transporting or moving
machines! |
Retail Price Only
|
| Thread Netting - Pack
15 pieces - 4" long - Perfect size for Rapos Cones |
$ 4.50 / pack
|
| Thread Netting - Yard
(cut it yourself for various types of thread) |
$ 1.25 / yard
|
|
|
|
|
PLASTIC SPRING -
(THREAD STABILIZER) |
Retail Price Only
|
| HSA20010
to be used on HCS. One per thread cone required to hold thread cones firmly against the felt to keep
loose thread from getting trapped between bottom of cone and
felt. (12 required per machine) To be
mounted on Thread Stand Pin before putting cone of thread on machine -
A
Must Have for HCS Voyager - Eliminates Annoying Thread Breaks!!
|
$ 0.90 ea.
|
|
|
|
|
ABRASIVE CORD
Essential
Tool! |
Retail Price Only
|
Abrasive Cord - 12 Foot Spool of
Sandpaper On A String for getting rid of needle scratches on both the Presser Feet and
Needle
Plates. Extends the life of these critical parts as well
as keeping thread from shredding!!
SAND
& SAVE!!
|
$ 6.95 ea.
|
|
|
|
|
ULTRA TAPE for the Happy Sash & Hooptech Clamps
|
Retail Price Only
|
|
UHMW-5A
- Ultra Tape - 36 yard
roll |
$ 54.00 / roll
|
|
UHMW-5A-YDS - Ultra Tape -
sold by the yard |
$ 3.25 / yard
|
|
Use this Polyethylene tape on the bottom of the tubular sash to keep
it from scratching the embroidery arm
(or table for flat sewing
applications) 25mm (1 in) wide and available by the roll or by the
yard.
|
|
EMBROIDERY TOUCH UP PENS |
Sale Price
|
Sale->
Touch Up Pens -
Set of 8 primary colors (black, blue,
brown, green, orange, purple, red and yellow) fine point for
embroidery
application Not affected by chlorine or UV radiation -
Permanent marker |
$
17.50 / set
|
|
|
|
|
TOOL KIT |
Retail Price Only
|
|
Tool Kit for HCS
|
$ 85.90 ea.
|
1 - #2 phillips screwdriver; 1 -
3mm allen wrench; 1 - 2.5mm allen wrench;
1 - 90deg straight blade
screw driver;
1 - 2mm straight blade screwdriver; 1 - M0404342 needle depth gauge; 1 - replacement lever handle; 1 - fuse 6A;
1 - small
cleaning brush;
10 - 75/11 light ballpoint needles
|
|
Front Cover for HCS Voyager
|
Retail Price Only |
HCBU12140 - Tinted Plastic Front Thread Cover with
Upgraded Metal Hinge ( close up of
hinge )
( replacement for the HCB16464 with plastic hinge ) - To
download the installation instructions please click
HERE |
$ 40.30 ea.
|
|
| There is more than 1 way
to get your designs from the computer to the machine!!!
|
|
Flash Card / Adapter for HCS/HCD/HCR
|
Retail Price Only
|
| 256MB Compact Flash
Card (Requires one Compact Flash Adapter to operate)
|
$ 29.95 ea.
|
|
Using Flash-type memory cards (the same kind found in many digital
cameras) is a fast, convenient way to transfer designs into the HCS
Voyager, HCD & HCR machines.
While we have seen cards up to 1Gb (1024Mb) work well, the official
recommendation is 256Mb max, which is still large enough to hold
thousands of average and large sized designs. (Requires
one Compact Flash Adapter to operate)
to download a tip
sheet on the flash card and adapter Click
HERE
|
| Compact Flash
Adapter (one required
per machine)
|
$ 17.95 ea.
|
|
You'll need a PCMCIA
Compact Flash adapter "sleeve" that the card fits into. This adapter "sleeve" allows the
card to be inserted into the type of removable card slot found in
laptops, which is the kind of slot on the side of the control panel where the card must be inserted.
(note, the card
CAN be inserted and/or removed while the machine is powered on and
while sewing -
just don't do this while a design is being
transferred!) for the HCS
Voyager, HCD & HCR machines.
|
|
USB MEMORY FLASH DRIVE
|
Retail Price Only
|
| Jump
Drive -
1 Gigabyte USB memory flash drive
|
$ 19.95 ea
|
|
HCS Voyager, HCD & HCR Happy machines can use a
1GB USB Jump Drive (
also called a memory stick or flash drive ).
The 1GB Jump Drive will hold
4 times the amount of the 256mb Flash Card. Using larger than 1GB not
recommended!
If your machine does not have
USB capability, there are upgrade kits
available. Call or email us for quote.
|
|
|
|
NO MORE FLOPPY DISKS for your HCA, HCG, HCM, HMF
& HM4 Happy Machines! |
|
We have the replacement option for the
floppy disk drive on your Happy machine
! |
|
USB FLOPPY DRIVE
REPLACEMENT |
Retail Price Only
|
|
RP-USB-HAPPY
-
USB floppy drive simulator (replaces the EPZ00281 floppy disk drive)
|
$ 375.00 ea
|
|
This direct replacement unit fits where your original floppy disk drive is
now. You will now be able to use a 1GB USB jump drive (see above).
All you do is remove your existing floppy disk drive unit and
replace it with the USB drive!! You DON"T need a
service tech to do this!!
Click
HERE to download an installation tip sheet. |
|
DIRECT CONNECT CABLE |
Retail Price Only
|
|
CSC-25 -
25 ft Cross-Serial cable for the HCA and HCG 12 and 15
needle machines (color monitor control panel only) |
$ 75.00 ea
|
|
You can connect you machine directly to your computer using this
direct connect cable and the Happy Link software (version 3.05)
that you
can download for free from happyemb.com. Click
Here
Click HERE
to download instructions for installing and using this cable. ( will
not work with the older standard control panel ) |
|
|
|
MACHINE STAND |
Retail Price Only
|
|
The best mobile stand
available for your HCS & HCD machine. |
$ 395.00 ea
|
|
This embroidery stand is supplied with 4
locking casters to insure maximum stability. The height is adjustable from
29.75" to 35.25". The table top is 29" deep by 34"
wide, with a 16" by 24" adjustable shelf underneath. Ships
unassembled (wt. 88 lbs) with instructions and hardware. (click here
to download assembly instructions) Here are some pics - angle
view - side view
- front view
|
|
MANUALS |
|
