HCH Journey 701 Embroidery Machine

HCH Journey 701 Embroidery Machine

 

HAPPY Embroidery Machine

HCH Journey 701 Embroidery Machine

Quick link to buy HCH Parts online.

Parts

Kit Part # Part Descriptions Price
BCPK HCH Basic Consumable Parts Kit for HCH Journey contains these items:
***No additional discounts will apply when ordering Kits***
$80.25 per kit

HCB12940 – Presser Foot for HCH  – 1 piece
HSA04030 – Bobbin Case “L Style” – 1 piece
HSA04010 – Rotary Hook  “L Style” – 1 piece
HCS14291 – Upper Thread Hook – 1 piece
HCD12111 – Needle Bar – 1 piece
Additional Replacement Parts for the HCH
Presser Feet (Please refer to your parts manual for correct part number)
Part # Part Descriptions Price
HCB12940 Presser foot for HCH Journey “Must Have Part!!” $10.00 ea
Bobbins Cases & Metal Bobbins
Part # Part Descriptions Price
HSA04030 Bobbin Case “L Style” “Must Have Part!!”  – Have at least ONE spare at ALL times!!
Do NOT use a bobbin case with a “pigtail” on the HCH. It can and will cause bird-nesting!
$12.00 ea
MPZ00550 Metal Bobbin (spool for use when winding your own bobbins) “L Style” -Requires the use of ABLS $0.70 ea
ABLS Anti-backlash Spring (for use with MPZ00550 when winding your own bobbins) “L Style” $0.70 ea
Be sure to remove this Spring when using Pre-Wound Bobbin Thread.
Rotary Hook
Part # Part Descriptions Price
HSA04010 Rotary Hook (Stainless Steel)  –  “L Style” “Must Have Part!!” $49.95 ea
Click HERE to download a manual on how to change the rotary hook.
Bed (Embroidery Arm)
Part # Part Descriptions Price
HCS05005 Thread Cutting Device Assembly (includes Fixed Knife, Moving Knife and Bobbin Thread Holder) $162.35 ea
HCB05061 Fixed Knife $33.75 ea
HCB05023 Moving Knife $42.05 ea
HCB05070 Bobbin thread holder $4.80 ea
HCS00161 Bed Cover (Upper, Stainless Steel Construction) for the Tubular Arm. $15.00 ea
Fixed Head
Part # Part Descriptions Price
HCB08063 Needle Bar Driver (Entire Assembly)  $162.50 ea
HCD08132 Black Nylon Body for Needle Bar Driver (Black Nylon Reciprocator)  “Must Have Part!!” $18.00 ea
This part is NOT shown in your HCH701 Parts List. It is part of the HCB08063 Needle Bar Driver
Moving Head
Part # Part Descriptions Price
HCS14291 Upper Thread Hook $7.45 ea
HCD12111 Needle Bar $25.90 ea
HCB12930 Needle Holder Assembly for HCH only (includes HMG12230 screw) $4.30 ea
HMG12230 Needle Holder Screw – 3mm Diameter (HCB12160) $0.80 ea
HCB14590 Magic Tape with adhesive for HCH (sold as 1 piece that needs to be cut to fit) $5.80 ea
Needle Depth Gauge
Part # Part Descriptions Price
M0404342 Essential Tool! 17.5 Needle Depth Gauge for ALL Happy Machines with “L Style” Rotary Hooks $23.05 ea
HSA20010 Plastic Spring for vibrating thread cones $1.20 ea
  One of these per cone to hold thread firmly against the felt, this prevents thread breaks. (12 required per machine).  Mounted directly on Thread Stand Pin before placing the cone of thread – Minimize Thread Breaks by keeping thread from getting trapped under the cone!
Tubular Sash & Cap Driver Parts
Happy has introduced a NEW single line cap grip that replaces the discontinued FRA44042 double band cap grip 
to make hooping caps easier than ever before!.
The first time you install the new FRA44270 single line cap grip you will need a grip guide and longer screws for the latch.
This comes as a set (FRAU44270) including the New Cap Grip, a Grip Guide and longer screws.
for more information please click HERE.
Part# Part Descriptions Price
FRAU44270 NEW Single Line Cap Grip Installation Set (replaces the FRA44042) $19.50 ea
Click HERE to download a PDF installation sheet
FRA44270 NEW Single Line Cap Grip Only (replaces the FRA44042) $13.50 ea
FRA44090 Grey Clip that attaches to the vertical posts on the rear of the  Wide Cap Frame Assembly $16.70 ea
SPDD03004 M3x4 Screws for adjusting Cap Grip tension (sold in packs of 10 pieces) $5.50 / pack of 10
HCB43220 Silver Thumbscrew for HCH tubular sash and new style cap driver (M5 x 15) $4.45 ea
HCS43141 Knob Bolt (Thumbscrew ) for HCH new style cap driver $4.50 ea
HCBU40011 Upgraded Tubular Frame Base Assembly with 3 Roller Bearings and 2 Piece Tubular Sash $173.85 ea
This beefier assembly helps eliminate vertical bouncing vibration in the Z Axis
To see the difference between the older and the upgraded style, click HERE
Happy Embroidery Machine Stand
Part# Part Descriptions Price
HCS STAND Happy Embroidery Machine Stand for HCH, HCS & HCD $395.00 ea
Embroidery Stand is supplied with 4 locking casters to insure maximum stability. The height is adjustable from 29.75″ to 35.25″. The table top is 29″ deep by 34″ wide, with a 16″ by 24″ adjustable shelf underneath. Ships unassembled (wt. 88 lbs) with instructions and hardware.
(click here to download assembly instructions) Here are some pics – angle view – side view – front view

For more information on the new equipment click HERE or go to www.happyemb.com.

Buy Online

Guides

Support

 

HAPPY Embroidery Machine Support
On this page, you’ll find resources to help you operate, maintain, troubleshoot and/or repair single-head and
multi-head HAPPY embroidery machines.
Happy Embroidery Machine support webpage: Click Here
** Please speak to a Parts Department Sales Associate to make sure you are ordering the correct parts for your machine.
Incorrectly ordered parts returned for credit are subject to a 15% restocking fee

[vCitaContact type=widget height=250 width=300]Contact Information: toll free: 1-855-373-6929Fax: 704-394-1881

Customer Service

Michael Bessell: 704-393-6548

Amy Norris: 704-393-6561

Joli Blend: 704-393-6572